-
Pit Bull
Pit Bull Rear Stand - BMW GS and F800R
The GS Rear Stand features a modular rear stand chassis by supporting the swingarm with rubber covered pegs. It is width adjustable and while similar to the Standard Rear Stand, its supports feature...$214.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Bonneville Rear (fits other bikes)
The Bonneville Rear Stand was developed to address the needs of bikes with low pipes that prevent the traditional standard rear stand from accessing the swingarm. This stand addresses the needs of...$249.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Dirt Bike
The Dirt Bike Rear Stand allows for lifting a variety of dirt bikes with a few exceptions. Two rubber covered pegs on either side of the bike are located under the swingarm for support with a third...$239.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Ducati 749/999
This stand is designed specifically for use with non-spooled Ducati 999 and 749 motorcycles before they had spool mounts. The stand comes with a removable handle. The top supports can be purchased...$209.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Fully Adjustable (GP)
Fully Adjustable Rear Stand - height adjustable 13" - 16", width adjustable 8.75" - 14-5/8" with support plates to fit motorcycles featuring the inverted "V" GP .This stand was designed to have...$229.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Fully Adjustable (Spooled)
Fully Adjustable Spooled Rear Stand (height and width adjustable for maximum versatility) This stand was designed for use with late model bikes that have low hanging stock rear fenders and have not...$219.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Fully Adjustable (Standard)
Fully Adjustable Rear Stand - height adjustable 11.75" - 14.75", width adjustable 9.625" - 15.25" for bikes without spools.This stand was designed for use with non-spooled swingarms and offers a lot...$219.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - GP Style
The GP Style Rear Stand is designed for use with bikes that feature a GP style inverted V on the swingarm.$209.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Kawasaki Concours 14 ('08-'22)
The Concours Rear Stand should fit '08-'22 Kawasaki Concours models. It was developed with feedback from C14 owners, and features height adjustability so that you can fine tune the height to your...$279.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Moto Guzzi V7
This rear stand was originally designed specifically for the first generation Moto Guzzi V7 Racer. In early 2016 the stand was redesigned to help prevent misalignment of the supports under the frame...$299.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Rebel 300-500-1100
The Honda Rebel 1100 requires a similar rear stand to the Triumph Bonneville models, but it needed to be wider. The Rebel 1100 Rear Stand features similar top supports as the Bonneville Rear Stand...$249.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Scrambler 1100
This rear stand is a variant of the original Scrambler 800 rear stand, specifically designed to fit the Ducati Scrambler 1100. The characteristics of the 1100 swingarm called for a stand that would...$229.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Scrambler 800 / Monster 797
This rear stand was designed specifically to fit the Ducati Scrambler 800 and Monster 797, but it also fits the Motus Motorcycle due to similar swingarm characteristics. The characteristics of these...$229.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Spooled
The Spooled Rear Stand lifts spool-equipped bikes. It is width adjustable to fit virtually all spool-equipped sportbikes. The Pit Bull rear motorcycle stand was designed as a modular platform which...$199.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Spooled Forward Handle
The Spooled Forward Handle Rear Stand lifts spool-equipped bikes. It is width adjustable to fit virtually all sport bikes. It is also height adjustable to set clearance under the rear wheel. It is...$229.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Sport Classic
The Sport Classic Rear Stand was designed to fit the Ducati Paul Smart 1000, GT 1000, and Sport 1000 bikes. This is a new design specifically for the Sport Classic models but has also been found to...$229.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Standard
The Standard Rear Stand lifts bikes that do not have provisions for spools to be installed by supporting the swingarm with rubber covered pegs. It is width adjustable to fit most modern sport bikes...$199.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Standard Forward Handle
The Standard Forward Handle Rear Stand lifts non-spool equipped bikes by supporting the swingarm with rubber pads. It is width adjustable to fit virtually all sport bikes. It is also height...$229.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Thunderbird 1600
The Thunderbird Rear Stand was designed to fit the Triumph Thunderbird 1600 models. It will not fit any 1700 models, although it should fit earlier Thunderbird 900 models.Very similar in design to...$239.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - VFR1200F
The VFR1200F Rear Stand was developed by Pit Bull with the assistance of American Honda to lift from the center stand mount location on VFR1200F's that do not have a center stand. The stand comes...$229.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand - Yamaha Vmax ('09-up) & Buell/EBR
This stand features extra-wide width to accommodate the wide swingarms found on the '09+ Buell 1125 , EBR 1190, and V-max motorcycles. Also works with Harley XR1200 if you are using the XR1200 Spool...$229.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand Refurbishing Kit
This kit includes all the parts you would need to assemble a rear stand again (not stand, top supports, or bolts though).$24.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand Replacement Pads (Pair) - Standard
Replacement rubber pads and plastic swingarm guards for rear stands. Works on Standard Rear, SS Rear and Forward Handle Standard Rear.$6.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand Spooled Plates - Forward Handle/Fully Adjustable
Use with the Forward Handle and/or Fully Adjustable Rear Stand to lift spool-equipped bikes.$19.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand Standard Plates - Forward Handle/Fully Adjustable
Use with the Forward Handle Rear Stand and/or the Fully Adjustable Rear Stand to lift non-spool equipped bikes.$19.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand Top Supports (Pair) - Ducati 749/999
These top supports are tailored to fit Ducati 999s and 749s that do not accept spools. They are made to lift the bikes without interfering with axle removal.These supports are not ideal for 2005 and...$47.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand Top Supports (Pair) - GP Style
These top supports are tailored to fit motorcycles with a GP style inverted "V" instead of traditional spool mounts. The top support has a "spool" mounted to it to lift from the inverted "V".$49.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand Top Supports (Pair) - Spooled
Spooled Top Supports lift spools mounted to your bike with "V" shaped plates.$36.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Rear Stand Top Supports (Pair) - Standard
Standard Top Supports lift from under the swingarm. Rubber pads have ridges to help them grip.$36.95Earn $0.00 in Moto Cash -
Pit Bull
Pit Bull Red Grip - for use on stands
This is the 4" long red grip found on most Pit Bull motorcycle stands and all Pit Bull Trailer Restraint Systems.$1.95Earn $0.00 in Moto Cash