Go

Accessories

Sidebar Sidebar Sidebar
  • Pit Bull ADV Pivot Plates - for Hybrid Front Stands

    Pit Bull

    Pit Bull ADV Pivot Plates - for Hybrid Front Stands

    These pivot plates can be used to both increase your max height and decrease your minimum height (although minimum height can only be decreased when using the front stand under the forks). They work on the Hybrid front stands that were made from 2012...
    $43.95
  • Pit Bull Hybrid Swivel - ABS friendly design (left side only)

    Pit Bull

    Pit Bull Hybrid Swivel - ABS friendly design (left side only)

    This swivel accommodates some motorcycles with the ABS sensor that blocks proper access to the back side of the left side fork when using the traditional Hybrid Swivels.Designed specifically for the '15+Yamaha R1, FZ-10, MT-10, '17+ R6, '21+ MT-09, and...
    $27.95
  • Pit Bull Hybrid Swivels (pair)

    Pit Bull

    Pit Bull Hybrid Swivels (pair)

    Converts a Hybrid Headlift stand to be able to lift from the bottom of the forks.NOTE: This will not convert the Newfront (F0031-000) model to be able to lift from the forks. It will only work with the 2012+ Hybrid Front Stand...
    $43.95
  • Pit Bull Ducati Hybrid Converter Pit Bull Ducati Hybrid Converter

    Pit Bull

    Pit Bull Ducati Hybrid Converter

    The Hybrid Ducati Converter is designed to allow you to convert your Hybrid Forklift or Hybrid Headlift to allow lifting the lower triple clamp of most Ducati Superbikes. This listing is for the Converter ONLY. The second photo showing the full...
    $208.95
  • Pit Bull Front Stand - Ducati Hybrid Dual Lift Pit Bull Front Stand - Ducati Hybrid Dual Lift

    Pit Bull

    Pit Bull Front Stand - Ducati Hybrid Dual Lift

    This stand is capable of lifting from underneath the forks or from the lower triple clamp of most Ducati Superbikes. On bikes with radial mount brakes, the swivel pegs are often placed under the caliper brackets instead of under the forks. Fits:...
    $404.95
  • Pit Bull Front Stand - Ducati Hybrid Headlift Pit Bull Front Stand - Ducati Hybrid Headlift

    Pit Bull

    Pit Bull Front Stand - Ducati Hybrid Headlift

    This stand is capable of lifting from the lower triple clamp of most Ducati Superbikes. Due to the absence of a hole in the lower triple clamp of 916-1198 Superbikes (and 748S/R models), it is necessary to lift those bikes using this "claw" that cradles...
    $360.95
  • Pit Bull Front Stand - BMW K1600B Forklift Pit Bull Front Stand - BMW K1600B Forklift

    Pit Bull

    Pit Bull Front Stand - BMW K1600B Forklift

    The BMW Forklift Stand features pegs on the swivel that goes under the telelever front end. This version also includes a pivot plate that adjusts even lower to fit the K1600B models. This stand can also be used on the R1200 models, but is not a...
    $249.95
  • Pit Bull Front Stand - Hybrid Forklift Pit Bull Front Stand - Hybrid Forklift

    Pit Bull

    Pit Bull Front Stand - Hybrid Forklift

    Our Hybrid Forklift Stand is based upon a modular design and can be easily converted to lift from the lower triple tree instead of the lower forks with the addition of hybrid converter. The Hybrid Forklift Front features 7 indexable height adjustments,...
    $229.95
  • Pit Bull Rear Stand - VFR1200F

    Pit Bull

    Pit Bull Rear Stand - VFR1200F

    The VFR1200F Rear Stand was developed by Pit Bull with the assistance of American Honda to lift from the center stand mount location on VFR1200F's that do not have a center stand. The stand comes complete with the appropriate pin. 
    $229.95
  • Pit Bull Rear Stand - Ducati 749/999

    Pit Bull

    Pit Bull Rear Stand - Ducati 749/999

    This stand is designed specifically for use with non-spooled Ducati 999 and 749 motorcycles before they had spool mounts. The stand comes with a removable handle. The top supports can be purchased separately to modify your existing Pit Bull rear stand...
    $209.95
  • Pit Bull Ultralight Rear Stand - 14" Wide

    Pit Bull

    Pit Bull Ultralight Rear Stand - 14" Wide

    The Ultralight Rear Stand was designed for serious race teams that demand an easy to use and lightweight stand in the pits. In its original form it was just tall enough to get a tire off the ground in the hot pits. It is 35% lighter than the...
    $197.95
  • Pit Bull Ultralight Rear Stand - 13.25" Wide

    Pit Bull

    Pit Bull Ultralight Rear Stand - 13.25" Wide

    The Ultralight Rear Stand was designed for serious race teams that demand an easy to use and lightweight stand in the pits. In its original form it was just tall enough to get a tire off the ground in the hot pits. It is 35% lighter than the...
    $197.95
  • Pit Bull Ultralight Rear Stand - 12.5" Wide

    Pit Bull

    Pit Bull Ultralight Rear Stand - 12.5" Wide

    The Ultralight Rear Stand was designed for serious race teams that demand an easy to use and lightweight stand in the pits. In its original form it was just tall enough to get a tire off the ground in the hot pits. It is 35% lighter than the...
    $197.95
  • Pit Bull Rear Stand - BMW GS and F800R Pit Bull Rear Stand - BMW GS and F800R

    Pit Bull

    Pit Bull Rear Stand - BMW GS and F800R

    The GS Rear Stand features a modular rear stand chassis by supporting the swingarm with rubber covered pegs. It is width adjustable and while similar to the Standard Rear Stand, its supports feature a shorter upright plate which allows better engagement...
    $214.95
  • Pit Bull Rear Stand - '08 Buell 1125

    Pit Bull

    Pit Bull Rear Stand - '08 Buell 1125

    This stand was designed specifically for the 2008 Buell 1125. The swivel supports are designed to ensure the stand does not slide on the swingarm nor do the pegs block access to the pinch bolt.NOTE: This stand is available exclusively with a...
    $229.95
  • Pit Bull Rear Stand - Thunderbird 1600

    Pit Bull

    Pit Bull Rear Stand - Thunderbird 1600

    The Thunderbird Rear Stand was designed to fit the Triumph Thunderbird 1600 models. It will not fit any 1700 models, although it should fit earlier Thunderbird 900 models.Very similar in design to the Bonneville Rear Stand, this version is wider and...
    $239.95
  • Pit Bull Rear Stand - Yamaha Vmax ('09-up) & Buell/EBR

    Pit Bull

    Pit Bull Rear Stand - Yamaha Vmax ('09-up) & Buell/EBR

    This stand features extra-wide width to accommodate the wide swingarms found on the '09+ Buell 1125 , EBR 1190, and V-max motorcycles. Also works with Harley XR1200 if you are using the XR1200 Spool Adapters.Spools are sold separately. V-max requires 6mm...
    $229.95
  • Pit Bull Rear Stand - Sport Classic

    Pit Bull

    Pit Bull Rear Stand - Sport Classic

    The Sport Classic Rear Stand was designed to fit the Ducati Paul Smart 1000, GT 1000, and Sport 1000 bikes. This is a new design specifically for the Sport Classic models but has also been found to be an excellent fit on the newer Honda CB650F and...
    $229.95
  • Pit Bull Rear Stand - Dirt Bike

    Pit Bull

    Pit Bull Rear Stand - Dirt Bike

    The Dirt Bike Rear Stand allows for lifting a variety of dirt bikes with a few exceptions. Two rubber covered pegs on either side of the bike are located under the swingarm for support with a third peg. It's design allows the pegs on either side located...
    $239.95
  • Pit Bull Rear Stand - Moto Guzzi V7 Pit Bull Rear Stand - Moto Guzzi V7

    Pit Bull

    Pit Bull Rear Stand - Moto Guzzi V7

    This rear stand was originally designed specifically for the first generation Moto Guzzi V7 Racer. In early 2016 the stand was redesigned to help prevent misalignment of the supports under the frame of the bike and to better suit the variety of Moto...
    $299.95
  • Pit Bull Rear Stand - Scrambler 1100

    Pit Bull

    Pit Bull Rear Stand - Scrambler 1100

    This rear stand is a variant of the original Scrambler 800 rear stand, specifically designed to fit the Ducati Scrambler 1100. The characteristics of the 1100 swingarm called for a stand that would prevent the bike from sliding forward, but the original...
    $229.95
!